1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5].)
2. Remove the following parts:a. Rear scuff plate (LH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)b. Rear seat cushion (LH) (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)c. Rear side seat back (LH) (See REAR SEAT BACK REMOVAL/INSTALLATION.)d. Tire house trim (LH) (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)e. C-pillar trim (LH) (See C-PILLAR TRIM REMOVAL/INSTALLATION.)
3. Disconnect the connector.
4. Remove the bolt.
5. Remove the condenser.
6. Install in the reverse order of removal.